Your browser does not support JavaScript!
長庚大學 機械工程學系
2008 SCI 國際期刊論文


  1. Tsai, M. Y. and Chen, C. H., “Evaluation of Test Methods for Silicon Die Strength,” Microelectronics Reliability, Vol. 48, No. 6, pp.933-941, June 2008 (SCI/EI)

  2. Tsai, M. Y., Chen, Y. C., and Lee, S. W. Ricky, “Correlation between Measurement and Simulation of Thermal Warpage in PBGA with Consideration of Molding Compound Residual Strain, ” IEEE Transactions on Components and Packaging Technologies, Vol. 31, No. 3, pp. 683-688, Sept. 2008 (SCI/EI)

  3. Tsai, M. Y., Wu, C. Y., Huang, C. Y., and Yang, S. S., “Transient Stress Distributions in NCF-Bonded COG Packages due to Moisture Diffusion,” IEEE Transactions on Advanced Packaging, Vol. 31, No. 3, pp. 454-462 , Aug. 2008 (SCI/EI)

  4. M.Y.Lee, C.C. Chang and Y.C. Ku, 2008,”New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental Restoration”, Journal of Medical Engineering and Technology, Vol. 32, No.1, January 2008 , pp.83-90, 2008, DOI: 10.1080/03091900600836642 (SCI).

  5. S.S.Hung, Zhon-Liau Lee and M.Y.Lee, 2008,” Clinical Application of Rapid Prototype Model in Pediatric Proximal Femoral Corrective Osteotomy”, Journal of ORTHOPEDICS, Vol.31, No.1, pp.1~5, January 2008 (SCI)

  6. M.Y.Lee, C.C.Kuo and S.S.Hung, 2008,” A new fluoroscopy-free navigation device for distal interlocking screws placement”, Journal of Medical Engineering and Technology, Vol.32, No.4, pp. 284~295, July 2008 (SCI).

  7. S.J. Liu, and K.H. Fu, Experimental Investigation and Numerical Simulation of the Heating/Cooling Process in Rotational Molding Enhanced with Fins, Journal of Applied Polymer Science, 108, 1696-1705 (2008) (SCI) --- NSC95-2221-E-182-032-MY3

  8. S.J. Liu, K.Y. Lin and S.K. Tsai, Improving Weldline Strengths of Injection Molded Partsby Ultrasonic Oscillation, Plastic, Rubber and Composites: Macromolecular Engineering, 37, 23-28 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

  9. S.J. Liu and K.H. Fu, Effect of the Enhancing Fins on the Heating/Cooling Efficiency of Rotational Molding and the Molded Product Qualities, Polymer Testing, 27, 209-220 (2008) (SCI) --- NSC95-2221-E-182-032-MY3

  10. S.J. Liu, and C.C. Shih, Water Assisted Injection Molding of Glass Fiber Reinforced Nylon-6 Composites, Journal of Reinforced Plastics and Composites, 27, 985-999 (2008) (SCI) --- NSC95-2221-E-182-032-MY3

  11. S.J. Liu, K.Y. Lin, and M.K. Li, Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing, International Polymer Processing, 23, 323-330 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

  12. S.J. Liu, K.Y. Lin, C.C. Liu, Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding Technology, Rubber Chemistry and Technology, 81, 156-167 (2008) (SCI) --- NSC96-2628-E-182-001-MY3

  13. Tsai, C.-M., and Wang, N. (2008), “An Efficient Global Optimization Algorithm for Multifactor Dynamic Systems,” Journal of Chinese Institute of Engineers, 31(6), pp 933-941. (SCI/EI)

  14. C.A. Huang, T.H. Wang, T. Weirich and V. Neubert, “Electrodeposition of a protective copper/nickel deposit on the magnesium alloy (AZ31)”, Corrosion Science 50 (2008) pp. 1385-1390.

  15. S.C. Chen, G.C. Tu, Caryat C.Y. Hung, C.A. Huang and M.H. Rei,“Preparation of palladium membrane by electroplating on AISI 316L porous stainless steel supports and its use for methanol steam reformer”, J. Membrane Science 314 (2008) pp. 5-14.

  16. C.A. Huang, Y.C. Chen and J.H. Chang,”The electrochemical polishing behavior of the Inconel 718 alloy in perchloric-acetic mixed acids” Corrosion Science 50 (2008) pp. 480-489.

  17. Chun-Chen Yang, Ying-Jeng Lee, Shwu-Jer Chiu, Kuo-Tong Lee, Wen-Chen Chien, Che-Tseng Lin, Ching-An Huang, “Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC)”, J Appl. Electrochem. (2008)pp. 1329-1337, DOI 10.1007/s10800-008-9563-x.

  18. C.A. Huang, T.H. Wang, T. Weirich and V. Neubert, “A pretreatment with galvanostatic etching for copper electrodeposition on pure magnesium and magnesium alloys in an alkaline copper-sulfate bath”, Electrochimica Acta 53 (2008) pp. 7235-7241.

  19. C. A. Huang, T. H. Wang, Y. Z. Chang, W. C. Han, C. H. Lee, “Tensile behavior of different pretreated alloy 718 sheets welded with electron beam welding (EBW)”, Science and Technology of welding and Joining 13 (2008) pp. 646-655.

  20. Yau-Zen Chang, Zhi-Ren Tsai,Jiing-Dong Hwang*,and Jye Lee, “Robust Fuzzy Control and Evolutionary Fuzzy Identification of Singularly Perturbed Nonlinear Systems with Parameter Uncertainty,”Electrical Engineering, Vol. 90,No. 5, pp. 379-393,May,2008. (SCI,Impact Factor:0.165;188/276)

  21. Zhi-Ren Tsai*,Yau-Zen Chang,Jiing-Dong Hwang,and Jye Lee, “Robust Fuzzy Stabilization of Dithered Chaotic Systems Using Island Random Optimal Algorithm ,”Information Sciences, Vol. 178, pp. 1171-1188,2008. (SCI,Impact Factor:1.033;39/87;EI)

  22. Chou, D.-Y.*, Yang, M.-H., Liang, Z.-C., Sun, M.-T.,“Measurements of Absorption of Acoustic Waves in Sunspots with Direction Filters and Cross Correlation”, The Astrophysical Journal 690, L23-L26. 2008.

  23. C.L. Lin, Y.H. Chang, Y.F. Lin, “Combining structural-thermal coupled field FE analysis and the Taguchi method to evaluate the relative contributions of multi-factors in a premolar adhesive MOD restoration”, Journal of Dentistry, Vol 36, 626-636, 2008. (SCI, Category: Dentistry, Oral Surgery & Medicine: 15/51, IF=1.995)

  24. H.L. Liu, M.T. Sun, *C.L. Lin, H.Y. Cheng, K.C. Wei, W.K. Su, “Biomechanical analysis of interbody and posterolateral fusion with transpedicular screw fixation for spondylolisthesis: a finite element study”, Biomedical Engineering: Applications, Basis and Communications, Vol 20, 145-151, 2008. (EI) (Corresponding author)

  25. H.Y. Cheng, *C.L. Lin, S.W. Chou, H.W. Wang, “Nonlinear finite element analysis of the plantar fascia due to the Windlass mechanism”, Foot & Ankle International, Vol 29, 845-851, 2008 (SCI, Category: ORTHOPEDICS : 29/48, IF=0.956) (Corresponding author)

  26. H.Y. Cheng, *C.L. Lin, H.W. Wang, S.W. Chou, “Finite element analysis of plantar fascia under stretch-the relative contribution of Windlass mechanism and Achilles tendon force”, Journal of Biomechanics, Vol 41, 1937-1944, 2008. (SCI, Category: Engineering, Biomedical: 6/44, IF=2.897) (Corresponding author)

  27. C.L. Lin, Y. H. Chang, P. R. Liu, “Multi-factorial analysis of a cusp-replacing adhesive premolar restoration: a finite element study”, Journal of Dentistry, Vol 36, pp. 194-203, 2008. (SCI, Category: Dentistry, Oral Surgery & Medicine: 15/51, IF=1.995)

  28. L.J. Lo, C.L. Lin, Y.R. Chen, “A device for temporomandibular joint exercise and trismus correction: design and clinical application”, Journal of Plastic, Reconstructive & Aesthetic Surgery, Vol 61, pp. 297-301, 2008. (SCI, Category: SURGERY: 111/139, IF=0.623)

  29. C.L. Lin, J.C. Wang, L. C. Ramp, P.R. Liu, “Biomechanical response of implant systems placed in the maxillary posterior region under various conditions of angulation, bone density, and loading”, The International Journal of Oral & Maxillofacial Implants, Vol 23, pp. 57-64, 2008. (SCI, Category: Dentistry, Oral Surgery & Medicine: 20/51, IF=1.780)

  30. C.L. Lin, J.C. Wang, W.J. Chang, “Biomechanical interactions in tooth-implant supported fixed partial dentures with variations in the number of splinted teeth and connector type: a finite element analysis” , Clinical Oral Implants Research, Vol 19, pp. 107-117, 2008 (SCI, Category: Dentistry, Oral Surgery & Medicine: 9/51, IF=2.148)

  31. Wu , J.-J. "Modification of Hertzian behaviour in heavily loaded contact in the DMT regime", Journal of Physics D: Applied Physics, vol. 41, 185301, 2008.

  32. Wu, J.-J., "Easy-to-Implement Equations for Determining Adhesive Contact Parameters with the Accuracy of Numerical Simulations",Tribology Letters, Vol. 30, pp. 99-105, 2008.

  33. Shiao-Wen Tsai*, Jiunn-Woei Liaw, Fu-Yin Hsu*, Yi-Yun Chen, Ming-His Yeh, Mei-Jhih Lyu, “Surface-modified gold nanoparticles with folic acid as optical probes for cellular imaging”, Sensors 8, 6660-6673, 2008.

  34. S.-W. Tsai, Y.-Y. Chen, J.-W. Liaw*, “Compound cellular imaging of laser scanning confocal microscopy by using gold nanoparticles and dyes”, Sensors 8, 2306-2316, 2008. (NSC 95-2221-E-182-044)

  35. J.-W. Liaw*, P.-T. Wu, “Dispersion relation of surface plasmon wave propagating along a curved metal-dielectric interface”, Opt. Express 16(7), 4945-4951, 2008. (NSC 95-2221-E-182-044)

  36. J.-W. Liaw, “Analysis of a bowtie nanoantenna for the enhancement of spontaneous emission”, IEEE JSTQE, 14(6), 1441-1447, 2008.

  37. Shih, H. Y., Wu, H. C., “An Experimental Study of Upward Flame Spread and Interactions over Multuple Solid Fuels,” Journal of Fire Sciences, 26: 435-453 (2008). (SCI/EI, NSC95-2221-E-182-052)

  38. Shih, H. Y., Huang, Y. C., “Thermal Design and Model Analysis of the Swiss-roll Recuperator for an Innovative Micro Gas Turine,”Applied Thermal Engineering, doi:10.1016/j.applthermaleng. 2008.06.029 (2008) (SCI/EI, NSC94-2212-E-182-005)

  39. P.-H.Hsieh, C.-L.Tai,J.-W.Liaw, Y.-H.Chang, “Thermal damage potential during hip resurfacing in osteonecrosis of the femoral head:an experimental study”, J.Orthop.Res.,Sep.,1206-1209,2008(SCI,ISSN:0736-0266,IF=2.784,ORTHOPEDICS 2/43)

  40. Tai CL, Hsieh PH, Chen WP, Chen LH, Chen WJ, Lai PL “Biomechanical Comparison of Lumbar Spine Instability between Laminectomy and Bilateral Laminotomy for Spinal Stenosis Syndrome -An Experimental Study in Porcine Model” BMC Musculoskelet Disord. June 11;9(1):84, doi:10.1186/1471-2474-9-84, 2008. (SCI, IF: 1.323, R: 22/48, Orthopaedics)

  41. Chen SH, Tai CL, Lin CY, Chen WP “Biomechanical Comparison of a New Stand-Alone Anterior Lumbar Interbody Fusion Cage with Established Fixation Techniques- A Three-dimensional Finite Element Analysis” BMC Musculoskelet Disord. June18;9(1):88, doi:10.1186/1471-2474-9-88, 2008. (SCI, IF: 1.323, R: 22/48, Orthopaedics)

  42. R.M. Hwang, K.C. Cha, ”Construction of a prediction model for the structural stability of a surface grinder using backpropagation neural network” International Journal of Advanced Manufacturing Technology,Vol.37,No.11-12,pp.1093-1104,2008.