Your browser does not support JavaScript!
長庚大學 機械工程學系
左方清單
2013 SCI 國際期刊論文

2013

  1. M. Y. Tsai, P. S. Huang, C. Y. Huang, H. Jao, B. Huang, B. Wu, Y Y. Lin, W. Liao, J. Huang, L. Huang, S. Shih, and J. P. Lin, “Investigation on Cu TSV-Induced KOZ in Silicon Chips: Simulations and Experiments,” IEEE Transactions on Electron Devices, Vol. 60, No. 7, PP.2331-2337, July 2013(IF= 2.318, ranking 34/245=14%, Engr., Electrical & Electronics)

  2. W.W. Tsai, M.Y.Lee (corresponding author), W.L. Yeh, S.C. Cheng, K.S. Soon, K.F. Lei, W.Y. Lin,2013, “A Quantitative Method for Evaluating Inferior Glenohumeral Joint Stiffness Using Ultrasonography,” Medical Engineering & Physics (MEP), Vol.35, pp.236-240, DOI:10.1016/j.medengphy.2011.10.007, January 2013. (SCI;IF=1.78).

  3. K.S.Soon, M.Y.Lee (corresponding author), W.W.Tsai, C.F.Lin, C.H.Chen, 2013,” Development of a new swallowing electrical stimulation system (SESS) for treatment of dysphagia in stroke patients.” Journal of Medical and Biological Engineering, Vol.33, No.5, pp.497-503, DOI: 10.5405/jmbe.1117, 2013. (SCI;IF=0.9).

  4. K.F. Lei, S.C. Cheng, M.Y.Lee, W.Y. Lin, 2013,” Measurement and Estimation of Muscle Contraction Strength using Mechanomyography based on Artificial Neural Network Algorithm”, The Journal of Biomedical Engineering - Applications, Basis, Communications, Vol.25, No.2, pp.1350020-1-8,DOI: 10.1142/S1016237213500208,2013. (SCI;IF=0.236) .

  5. M.Y.Lee, K.S.Soon, W.Y.Lin, W.Y. Shieh, 2013,“ A New Biofeedback Lower Limb Neuroprothesis for Balance Control and Sensory Compensation in Amputees,” Journal of Neuroscience and Neuroengineering, Vol.2, pp.90-97, DOI: 10.1166/jnsne.2013.1041, 2013).

  6. M.Y.Lee, W.W.Tsai, Z.H.Tang, H.J.Chen, J.P.Chen, C.H.Chen, J.An, 2013,”Laser sintered porous polycaprolacone scaffolds loaded with hyaluronic acid and gelatin-grafted thermoresponsive hydrogel for cartilage tissue engineering,” Bio-Medical Materials and Engineering, Vol.23, pp.533-543, DOI No.10.13233/BME, May 2013 (SCI;IF=1.09).

  7. H.T.Liao, M.Y.Lee (corresponding author), W.W.Tsai, H.C.Wang, W.C.Lu, 2013, “Osteogenesis Of Adipose-Derived Stem Cells On Polycaprolactone/ β-Tricalcium Phosphate Scaffold Fabricated Via Selective Laser Sintering And Surface Coating With Collagen Type I,”J of Tissue Engineering and Regenerative Medicine, Vol. 23, No.2, pp.127-133, DOI No.10.1002/term.1811, July 2013 (SCI;IF=2,83).

  8. K.F.Lei, K.F. Lei, M.Y.Lee, 2013,”A Flexible PDMS Capacitive Tactile Sensor with Adjustable Measurement Range for Plantar Pressure Measurement,” Microsystem Technologies, No.20, pp.1351-1358, DOI 10.1007/s00542-013-1918-5, Sep. 2013. (SCI;IF=0.827).

  9. H.T.Liao, J.P.Chen and M.Y.Lee, 2013,” Bone Tissue Engineering with Adipose-Derived Stem Cells in Bioactive Composites of Laser-Sintered Porous Polycaprolactone Scaffolds and Platelet-Rich Plasma,”Materials, No.6, pp.4911-4929, DOI:10.3390/ma6114911, October 2013. (SCI;IF=2.247).

  10. H.Y. Huang,D.J. Yao, H.R. Huang, C.J. Li, Y.K. Soon, M.Y. Lee,D.J. Yoa, 2013,“Isolation of motile spermatozoa with a microfluidic chip having a surface-modified microchannel,” Journal of Laboratory Automation (JALA), Vol.19, No.1, pp.91-99, doi:10.1177/2211068213486650, April 2013 (SCI;IF=1.46).

  11. C.H. Lee, C.L. Chiang, S.J. Liu*, Electrospun nanofibrous rhodanine/polymethylmethacrylate membranes for the removal of heavy metal ions, Separation and Purification Process, 118, 737-743 (2013) (SCI) (指導作者).

  12. Y.K. Chao, K.S. Liu, Y.C. Wang, Y.L. Huang, S.J. Liu*, Biodegradable cisplatin-eluting Tracheal Stent for malignant airway obstruction: In vivo and in vitro studies, Chest, 144, 193-199 (2013)(SCI) (指導作者).

  13. Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Sustainable Release of Carmustine from Biodegradable Poly[(d,l)-lactide-co-glycolide] Nanofibrous Membranes in the Cerebral Cavity: In vitro and in vivo studies, Expert Opinion on Drug Delivery, 10, 879-888 (2013)(SCI) (指導作者).

  14. D. Lee, W.A. Chen, T.W. Huang, S.J. Liu*, Factors influencing the warpage in in-mold decoration (IMD) injection molded parts, International Polymer Processing, 28, 221-227 (2013) (SCI) (指導作者) NSC98-2221-E-182-003-MY3.

  15. K.Y. Lin, S.J. Liu*, Fast Fabrication of Microfeatured Plastic Diffusers Using IR-assisted Injection Molding, Materials and Manufacturing Process, 28, 19-23 (2013) (SCI) (指導作者).

  16. Y.J. Peng, Y.T. Lu, K.S. Liu, S.J. Liu*, L. Fan, W.C. Huang, Biodegradable Balloon-expandable Self-locking Polycaprolactone Stents as Buckling Explants for the Treatment of Retinal Detachment: An in vitro and in vivo study, Journal of Biomedical Materials Research Part A, 101A, 167-175 (2013) (SCI) (指導作者).

  17. D.W.C. Chen, F.Y. Lee, J.Y. Liao, S.J. Liu*, C.Y. Hsiao, J.K. Chen, Preclinical experiments on the release behavior of biodegradable nanofibrous multi-pharmaceutical membranes in the four-wall intrabony defect, Antimicrobial Agents and Chemotherapy, 57, 9-14 (2013) (SCI) (指導作者).

  18. S.J. Liu, W.A. Chen, Nanofeatured anti-reflective films manufactured using hot roller imprinting and self-assembly nanosphere lithography, Optics and Laser Technology, 48, 226-234 (2013) (SCI) NSC100-2221-E-182-020-MY3.

  19. Y.C. Kau, D.W.C. Chen, Y.T. Hsieh, F.Y. Lee, S.J. Liu*, Compression Molding of Biodegradable Drugeluting Implants for Sustained Release of Metronidazole and Doxycycline, Journal of Applied Polymer Science, 127, 554-560 (2013) (SCI) (指導作者).

  20. Yau-Zen Chang, Zhi-Ren Tsai, Jiing-Dong Hwang, and Jye Lee (2013, Jan). Optimal Fuzzy Tracking Control of Uncertain Nonlinear Systems Based on Genetic Algorithms and Fuzzy Lyapunov Function. JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 24(1),121-132.

  21. Chen A. C.-Y., Lin Y.-H., Kuo H.-N., Yu T.-C., Sun, M.-T., Lin C.-L., “Design optimisation and experimental evaluation of dorsal double plating fixation for distal radius fracture,” Injury 44, pp. 527-534, 2013.

  22. Lin Y.-H., Lin C.-L., Kuo H.-N., Sun, M.-T., Chen A. C.-Y., “Biomechanical Analysis of Volar and Dorsal Double Locking Plates for Fixation in Comminuted Extra-articular Distal Radius Fractures: A 3D Finite Element Study,” Journal of Medical and Biological Engineering 325, pp. 349-356, 2013.

  23. Ching An Huang*, Jo Hsuan Chang, Fu-Yung Hsu, Chih Wei Chen., “Electropolishing behaviour and microstructures of copper deposits electroplated in an acidic copper-sulphuric bath with different thiourea contents:Surface & Coatings Technology 2013.

  24. Ching An Huang*, Jo Hsuan Chang, Chao Yu Chen, Kang Yu Liao , Joachim Mayer., “Microstructure and electrochemical corrosion behavior of Cr–Ni–Fe alloy deposits electroplated in the presence of trivalent Cr ions: Thin Solid Films 2013.

  25. Cha, K.-C., Wang, N., and Liao, J.-Y., “Stability Analysis for the Crankshaft Grinding Machine Subjected to a Variable-Position Worktable,” The International Journal of Advanced Manufacturing Technology, 67, pp. 501-516, 2013. (SCI).

  26. J.-W. Liaw , H.-C. Chen, M.-K. Kuo, “Plasmonic Fano Resonance and Dip of Au-SiO2-Au Nanomatryoshka”, Nanoscale Res Lett. 8:468, 2013.

  27. J.-W. Liaw , H.-C. Chen, M.-K. Kuo, “Plasmonic Fano Resonance and Dip of Au-SiO2-Au Nanomatryoshka”, Nanoscale Res Lett. 8:468, 2013.

  28. J.-W. Liaw , H.-C. Chen, M.-K. Kuo, “Plasmonic Fano Resonance and Dip of Au-SiO2-Au Nanomatryoshka”, Nanoscale Res Lett. 8:468, 2013.

  29. S.-W.Tsai*, J.-W. Liaw, Y.-C. Kao, M.-Y. Huang and C.-Y. Lee, C.-Y. Huang, K.-C. We, T.-C. Yen, “A quantitative, in vitro study of the internalized gold nanoparticles do not impair the osteogenesis and apoptosis of MG63 osteoblast-like cell”, PLOS ONE 8(10), e76545, 2013.

  30. J.-W. Liaw*, J.-C. Cheng, C. Ma, R. Zhang, “Theoretical analysis of plasmon modes of Au-Ag nanocages”, J. Phys. Chem. C 117,19586−19592, 2013.

  31. J.-W. Liaw*, C.-Y. Jiang , “Plasmonic modes of Ag nanoshell excited by bi-dipole”, Plasmonics 8(2), 255–265, 2013.

  32. Y. Gao, R. Zhang, J.-C. Cheng, J.-W. Liaw*, C. Ma, “Optical properties of plasmonic dimer, trimer, tetramer and pentamer assembles of gold nanoboxes”, J. Quant. Spectrosc. Radiat. Transfer 125, 23-32, 2013.

  33. J.-W. Liaw , C.-H. Huang, M.-K. Kuo*, “Longitudinal plasmon modes of Ag nanorod coupled with a pair of quantum dots”, J. Nanosci. Nanotechnol. 13, 6627-6634, 2013.

  34. H.-W. Yang, H.-L. Liu, M.-L. Li, I-W. Hsi, C.-T. Fan, C.-Y. Huang, Y.-J. Lu, M.-Y. Hua, H.-Y. Chou, J.-W. Liaw , C.-C. M. Ma*, K.-C. Wei*, Magnetic gold-nanorod/ PNIPAAmMA nanoparticles for dual magnetic resonance and photoacoustic imaging and targeted photothermal therapy. Biomaterials 34(22), 5651 -5660, 2013.

  35. J.-W. Liaw*, C.-Y. Jiang (2013, Jan). Bi-dipole emission via plasmon modes of Au/Ag nanoshell. J. Quant. Spectrosc. Radiat. Transfer, Vol. 114, pp. 56-64.

  36. J.-L. Shih, K.-T. Wu, C.-K. Jen, C.-H. Chiu, J.-C. Tzeng, and J.-W. Liaw*, “Applications of flexible ultrasonic transducer array for defect detection at 150° C”, Sensors 13, 975-983, 2013.

  37. Shih, H. Y. and Hsu, J. R., “Dilution Effects Analysis of Opposed-jet H2/CO Syngas Diffusion Flames,” Combustion Theory and Modelling, 17 (3): 543-562, 2013. .

  38. Chang Y, Tai CL, Hsieh PH, Ueng SW “Gentamicin in bone cement: A potentially more effective prophylactic measure of infectionin joint arthroplasty” Bone Joint Res, 2(10):220-226, Oct. 2013.

  39. Wu MH, Wang HY, Tai CL, Chang YH, Chen YM, Huang SB, Chiu TK, Yang TC, Wang SS “Development of perfusion-based microbioreactor platform capable of providing tunable dynamic compressive loading to 3-D cell culture construct- Demonstration study of the effect of compressive stimulations on articular chondrocyte functions” Sensor Actuat B-Chem 176:86-96, Jan., 2013. (1 Equal Contribution)

  40. Li-Ang Lee, Jen-Fang Yu, Yu-Lun Lo, Yen-Sheng Chen, Ding-Li Wang, Chih-Ming Cho, Yung-Lun Ni, Ning-Hung Chen, Tuan-Jen Fang, Chung-Guei Huang, Hsueh-Yu Li, 2013, “Energy Types of Snoring Sounds in Patients with Obstructive Sleep Apnea Syndrome: A Preliminary Observation”. PLOS ONE. (SCI 12/85, IF:4.092).

  41. Jen-Fang Yu, Chia-Lun Fan, 2013, “Spatial imaging of the Human Tympanic Membrane”. Applied Mechanics and Materials Vols. 284-287, pp1676-1680. doi:10.4028/www.scientific.net/AMM.284-287.1676 (EI).

  42. Jen-Fang Yu, Kun-Che Lee, 2013, “Measurement of the Human Cochlear Spiral Curvature In Vivo”. Applied Mechanics and Materials Vols. 284-287, pp1552-1558. doi:10.4028/www.scientific.net/AMM.284-287.1552 (EI).

  43. Jen-Fang Yu, Chia-Lun Fan, 2013, “The non-invasive measurement of geometry of human ossicles”. Applied Mechanics and Materials Vols. 284-287, pp1569-1573. doi:10.4028/www.scientific.net/AMM.284-287.1569 (EI).

  44. Jen-Fang Yu, Yen-Sheng Chen, 2013, “The head shadow phenomenon affected by sound source: in vitro measurement”. Applied Mechanics and Materials Vols. 284-287, pp1715-1720. doi:10.4028/www.scientific.net/AMM.284-287.1715 (EI).

  45. Chia-Hao Hung, Wei-Shan Wang, Yu-Ching Lin, Ting-Wei Liu, Jia-Hong Sun, Yung-Yu Chen, Masayoshi Esashi and Tsung-Tsong Wu, "Design and fabrication of an AT-cut quartz phononic Lamb wave resonator," J. Micromech. Microeng., 23, 065025(1-6), 2013. (SCI)

  46. Yung-Yu Chen, Li-Chung Huang, Wei-Shan Wang, Yu-Ching Lin, Tsung-Tsong Wu, Jia-Hong Sun, and Masayoshi Esashi, "Acoustic interference suppression of quartz crystal microbalance sensor arrays utilizing phononic crystals," Appl. Phys. Lett., 102, 153514, 2013. (SCI)

  47. Kin Fong Lei*, Kuan-Hao Chen, Po-Hsiang Tsui, Ngan-Ming Tsang, "Real-time Electrical Impedimetric Monitoring of Blood Coagulation Process under Temperature and Hematocrit Variations Conducted in a Microfluidic Chip", PLoS ONE, 8:e76243, 2013.

  48. Kin Fong Lei*, Shih-I Yang, "Bundled Carbon Nanotube-based Sensor on Paper-based Microfluidic Device", Journal of Nanoscience and Nanotechnology, 13:6917-6923, 2013.

  49. Kin Fong Lei*, Shin-Chung Cheng, Ming-Yih Lee, Wen-Yen Lin, "Measurement and Estimation of Muscle Contraction Strength using Mechanomyography based on Artificial Network Algorithm", Biomedical Engineering: Applications, Basis and Communications, 25:1350020, 2013.

  50. Wen-Wei Tsai, Ming-Yih Lee*, Wen-Lin Yeh, Shih-Chung Cheng, Kok-Soon Soon, Kin Fong Lei, Wen-Yen Lin, "A Quantitative Method for Evaluating Inferior Glenohumeral Joint Stiffness using Ultrasonography", Medical Engineering & Physics, 35:236-240, 2013.

  51. Kin Fong Lei*, "Recent Developments and Patents on Biological Sensing using Nanoparticles in Microfluidic Systems", Recent Patents on Nanotechnology, 7:81-90, 2013.

  52.  

   

系學會

數據載入中...