論文發表:
- S.J. Liu, Modeling and Simulation of Thermally Induced Stresses and Warpages in Injection Molded Thermoplastics, Polymer Engineering and Science, 36, 807(1996) (SCI)
- S.J. Liu, A New Viscoelastic Phase Transformation Model to Simulate the Injection Molding Residual Stress, Journal of Applied Polymer Science, 62, 1537(1996) (SCI)
- S.J. Liu, Modeling and Simulation of Vacuum Forming of Wood Fiber Filled Thermoplastic Composites, Polymer Composites, 18, 673(1997) (SCI)
- S.J. Liu, Sintering Rheology of Semi-crystalline Polymers, International Polymer Processing, 13, 88(1998) (SCI)---NSC 86-2216-E182-002
- S.J. Liu, B.C. Chang, L.H. Chien and Y.H. Tsai, Development of Weldability Diagram for Ultrasonically Welded Thermoplastics., Plastic, Rubber and Composite, 27, 279(1998) (SCI)---NSC 86-2216-E182-002
- S.W.N. Ueng, S.S. Lee, S.S. Lin, C.R. Wang, S.J. Liu, et al., Bone Healing of Tibial Lengthening Is Enhanced by Hyperbaric Oxygen Therapy: A Study of Bone Mineral Density and Torsional Strength on Rabbits., Journal of Trauma, 44, 676(1998) (SCI)
- S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., “Bone Healing of Tibial Lengthening is Delayed by Cigarette Smoking: Study of Bone Mineral Density and Torsinal Strength on Rabbits”, Journal of Trauma, 46, 110(1999) (SCI)
- S.J. Liu, Process Optimization of Thermoforming PP/CaCO3 Composites, International Polymer Processing, 14, 98(1999) (SCI)
- S.J. Liu, J.H. Chang, C.Y. Ho and S.W. Hung, Optimization of the Weldline Strength in Gas-Assist Injection Molded Thermoplastics, International Polymer Processing, 14, 191(1999) (SCI)
- S.J. Liu, Computer Simulation of the Inflation Process in Blow Molding, Journal of Reinforced Plastics and Composites, 18, 759(1999) (SCI)
- S.J. Liu, W.F. Lin and B.C. Chang, G. Wu and S.W. Hung, Optimizing the Joint Strength in Ultrasonically Welded Thermoplastics, Advances in Polymer Technology, 18, 125(1999) (SCI) ---NSC 86-2214-E182-002
- S.S. Lin, S.W.N. Ueng, S.J. Liu, et al., Research and Development of A Biodegradable Antibiotic Delivery System, Clinical Orthopedic, 362, 240(1999) (SCI)
- S.J. Liu and C.Y. Ho, Factors Affecting the Warpage of Rotationally Molded Parts, Advances in Polymer Technology, 18, 201(1999) (SCI) --- NSC 86-2216-E182-002
- S.J. Liu and C. H. Tsai, An Experimental Study of Foamed Polyethylene in Rotational Molding, Polymer Engineering and Science, 39, 1776(1999) (SCI) ---NSC 86-2216-E182-002
- S.J. Liu, S.W.N. Ueng, E.C. Chan, et. al., In Vitro Elution of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 48, 613(1999) (SCI)
- S.W.N. Ueng, S.S. Lin, C.R. Wang, S.J. Liu, et al., Hyperbaric Oxygen Therapy Migrates the Adverse Effect of Cigarette Smoking on the Bone Healing of Tibial Lengthening: An Experimental Study on Rabbits, Journal of Trauma, 47, 752(1999) (SCI)
- S.J. Liu, C.H. Tsai, S.W.N. Ueng and S.S. Lin, Processing of Biodegradable Composites for a Durg Delivery System in Vitro, International Polymer Processing, 14, 322(1999) (SCI)
- S.J. Liu, C.C. Lai and S.T. Lin, Optimizing the Impact Strength of Rotationally Molded Parts, Polymer Engineering and Science, 40, 473(2000) (SCI) ---NSC 87-2216-E182-005
- Y.K. Chuah, L.H. Chien, B.C. Chang and S.J. Liu, Effects of the Shape of the Energy Director on Far-Field Ultrasonic Welding of Thermoplastics, Polymer Engineering and Science, 40, 157(2000) (SCI)
- S.J. Liu and J.H. Chang, The Occurrence of Surface Roughness in Gas Assist Injection Molded Nylon Composites, Polymer Composites, 21, 322(2000) (SCI) --- NSC 89-2216-E182-005
- S.J. Liu, J.Y. Wu, J.H. Chang and S.W. Hung, An Experimental Matrix Design to Optimize the Weldline Strength of Injection Molded Parts, Polymer Engineering and Science, 40, 1256(2000) (SCI)
- S.J. Liu and C.Y. Ho, A Study of Warpage in Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 19, 992(2000) (SCI) --- NSC 87-2216-E182-005
- S.J. Liu and Y.C. Wu, Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts, International Polymer Processing, 15, 297(2000) (SCI)
- S.J. Liu and C.H. Yang, Rotational Molding of Expanded Polyethylene by Pellet, Cellular Polymer, 19, 257(2000) (SCI) --- NSC 87-2216-E182-005
- S.J. Liu and J.H. Chang, Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites, Journal of Reinforced Plastics and Composites, 19, 1352(2000) (SCI) --- NSC 89-2216-E182-005
- S.J. Liu and C.F. Chen, Optimization of the Bubble Size of Rotationally Molded Parts, Plastic, Rubber and Composites, 29, 411(2000) (SCI) --- NSC 88-2216-E182-005
- S.J. Liu and I.T. Chang, Factors Affecting the Joint Strength of Ultrasoncially Welded Polypropylene Composites, Polymer Composites, 22, 132(2001) (SCI)
- S.J. Liu and C.Y. Yang, Optimizing the Weldline Strength of Injection Molded Liquid Crystal Polymers, Journal of Polymer Engineering, 21, 53(2001) (SCI)
- S.J. Liu and C.H. Yang, Rotational Molding of Two-Layered Polyethylene Foams, Advances in Polymer Technology, 20, 108(2001) (SCI) --- NSC 88-2216-E182-005
- S.J. Liu, Effects of Processing Parameters on Formation of Sinkmark on Injection Molded Parts, Plastics Rubber and Composites, 30, 170(2001) (SCI)
- S.J. Liu, C.H. Lin and Y.C. Wu, Minimizing the Sinkmark in Injection Molded Thermoplastics, Advances in Polymer Technology, 20, 202(2001) (SCI)
- S.J. Liu and I.T. Chang,, Surface Roughness at the Transition Sites of Gas Assist Injection Molded Nylon Composites, Journal of Reinforced Plastics and Composites, 21, 217(2002) (SCI)
- S.J. Liu and I.T. Chang, Optimizing the Weld Strength of Ultrasonically Welded Nylon Composites, Journal of Composite Materials, 36, 611(2002) (SCI)
- S.J. Liu, and C.Y. Yang, An Experimental Study of the Weldline Caused by the Flow-lead Effect in Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 36(2002) (SCI)
- S.J. Liu, and I.H. Lin, Glossy Difference on the Surface of Gas Assisted Injection Molded Parts, Plastics Rubber and Composites, 31, 28(2002) (SCI)
- S.J. Liu, and I.H. Lin, An Empirical Study of the Surface Blush in Gas-Assisted Injection Molded Parts, International Polymer Processing, 17, 60(2002) (SCI)
- S.J. Liu and C.F. Chen, Significance of Processing Parameters on the Warpage of Rotationally Molded Parts, Journal of Reinforced Plastics and Composites, 21, 723(2002) (SCI)
- S.J. Liu, C.H. Hsu and C.Y. Chang, Parametric Characterization of the Thin-Wall Injection Molding of Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 21, 1027(2002) (SCI)
- S.W.N. Ueng, L.J. Yuan, N. Lee, S.S. Lin, S.J. Liu et al., In Vivo Study of Hot Compression Molded 50:50 Poly(DL-lactide-co-glycolide) Antibiotic Beads in Rabbits, Journal of Orthopedic Research, 20, 654(2002) (SCI)
- S.J. Liu and K.H. Chang, An Empirical Study of Gas Penetration in Full-shot Gas-assisted Injection Molded Parts, Proceeding Institute of Mechanical Engineering Part B: Journal of Engineering Manufacturing, 216, 1549(2002) (SCI)
- S.J. Liu, S.W.N. Ueng, S.S. Lin, E.C. Chan, In Vivo Release of Antibiotics from Biodegradable Beads., Journal of Biomedical Materials Research(Applied Biomaterials), 63, 807(2002) (SCI)
- S.J. Liu, and K.H. Chang, Parameters Affecting the Full-shot Molding of Gas Assisted Injection Molded Parts, Advances in Polymer Technology, 22, 1(2003) (SCI)
- C.H. Chen, W.J. Chen, C.H. Shih, S.J. Liu and P.Y. Lin, Enveloping the Tendon Graft with Periosteum to Enhance Tendon-Bone Healing in a Bone Tunnel-A Biomechanical and Histological Study in Rabbits, Arthroscopy-The Journal of Arthroscopic and Related Surgery, 18, 290-296(2003) (SCI)
- S.J. Liu, and C.Y. Chang, The Influence of Processing Parameters on Thin-wall Gas Assisted Injection Molding of Thermoplastic Materials, Journal of Reinforced Plastics and Composites, 22, 711(2003) (SCI)
- S.J. Liu, and Y.S. Chen, Water Assisted Injection Molding of Thermoplastic Materials: Effects of Processing Parameters, Polymer Engineering and Science, 43, 1806(2003) (SCI) --- NSC 91-2216-E182-006 (IF=1.296)
- S.L. Hwang, S.J. Liu, W.L. Chen, C.L. Wang, S.W. Chou, Experimental Development of Processing Technology for Yuba-like Films Using Twin-Screw Extrusion, International Polymer Processing, 18, 343-348(2003) (SCI)
- S.J. Liu and Y.S. Chen, The Manufacturing of Thermoplastic Composites by Water Assisted Injection Molding Technology, Composite Part A: Applied Science and Manufacturing, 35, 171-180(2004) (SCI) --- NSC 91-2216-E182-006
- G. Wang, S.J. Liu*, S.W.N. Ueng, and E.C. Chan, The Release of Cefazolin and Gentamicin from Biodegradable PLA/PGA Beads, International Journal of Pharmaceutics, 273, 203-212(2004) (SCI) (指導作者)
- G.M. Wu, C.H. Hung, J.H. You and S.J. Liu, Surface Modification of Reinforcement Fibers for Composites by Acid Treatments, Journal of Polymer Research, 11, 31-36(2004) (SCI)
- S.J. Liu, and C.Y. Yang, Application of Statistic Estimation to Weldline Strengths of Injection Molded Thermoplastic Composites, Journal of Reinforced Plastics and Composites, 23, 1383-1396(2004) (SCI)
- S.J. Liu, and W.K. Chen, Experimental Investigation and Numerical Simulation of the Cooling Process in Water Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 33, 260-266(2004) (SCI) --- NSC 92-2216-E182-004
- S.J. Liu, Y.E. Tsai, S.W.N. Ueng, E.C. Chan, A Novel Solvent-Free Method for the Manufacture of Biodegradable Antibiotic-Capsules for a Long-term Drug Release Using Compression Sintering and Ultrasonic Welding Techniques, Biomaterials, 26, 4662-4669 (2005) (SCI) --- NSC 93-2216-E-182-004
- S.J. Liu, and K.Y. Lin, Injection Compression Molding of Wedge-shaped Plates: Effects of Processing Parameters, Journal of Reinforced Plastics and Composites, 24, 373-384(2005) (SCI)
- Y.Z. Chang, T.T. Wen, and S.J. Liu, Derivation of Optimal Processing Parameters of Polypropylene Foam Thermoforming by an Artificial Neural Network, Polymer Engineering and Science, 45, 375-384(2005) (SCI) S.J. Liu, Y.T. Dung, Hot Embossing Microstructures onto Plastic Plates by Ultrasonic Vibration, Polymer Engineering and Science, 45, 915-925(2005) (SCI)
- S.J. Liu, S.P. Lin, Study of “Fingering” in Water Assisted Injection Molded Composites, Composite Part A: Applied Science and Manufacturing, 36, 1507-1517(2005) (SCI) --- NSC93-2216-E-182-004
- Y.C. Wu, S.J. Liu*, Flow Visualization of Water Assisted Injection Molding Process, Plastic, Rubber and Composites: Macromolecular Engineering, 34, 227-231 (2005) (SCI) (指導作者)
- S.J. Liu, Y.C. Wu, P.C. Lai, Water Penetration Stability in Water Assisted Injection Molded Symmetric Ribs, International Polymer Processing, 20, 352-359 (2005) (SCI)
- S.J. Liu, Y.T. Dung, Ultrasonic Vibration Hot Embossing – A Novel Technique for Molding Plastic Microstructure, International Polymer Processing, 20, 449-452 (2005) (SCI)
- S.J. Liu, Y.C. Wu, W.K. Chen, Surface Gloss Difference on Water Assisted Injection Molded Thermoplastic Parts: Effects of Processing Variables, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 29-36 (2006) (SCI) --- NSC 93-2216-E182-004
- S.J. Liu, S.P. Lin, Parameters Affecting the Formation of Fingerings in Water-Assisted Injection Molded Thermoplastics, Advances in Polymer Technology, 25, 98-108 (2006) (SCI) --- NSC 93-2216-E182-004
- S.J. Liu, Y.C. Wu, A Novel High Flow-rate Pin for Water-Assisted Injection Molding of Plastic Parts with a More Uniform Residual Wall Thickness Distribution, International Polymer Processing, 21, 436-439 (2006) (SCI) --- NSC95-2221-E-182-032-MY3
- Y.C. Wu, K.M. Chen, S.J. Liu*, Core-out Geometries in Water Channels of Water-Assisted Injection Molded Parts, Plastic, Rubber and Composites: Macromolecular Engineering, 35, 425-431(2006) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)
- S.W.N. Ueng, M.S. Lee, S.S. Lin, E.C. Chang, S.J. Liu, Development of a Biodegradable Alginate Carrier System for Antibiotics and Bone Cells, Journal of Orthopaedic Research, 25, 62-72 (2007) (SCI)
- S.J. Liu, and Y.C. Chang, A Novel Soft-mold Roller Embossing Method for the Rapid Fabrication of Micro-blocks onto Glass Substrates, Journal of Micromechanics and Microengineering, 17, 172-179 (2007) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, P.S. Chi, S.S. Lin, S.W.N. Ueng, E.C. Chan, J.K. Chen, Novel Solvent-free Fabrication of Biodegradable Poly-lactic-glycolic Acid (PLGA) Capsules for Antibiotics and rhBMP-2 Delivery, International Journal of Pharmaceutics, 330, 45-53 (2007) (SCI)
- S.J. Liu and Y.C. Wu, Dynamic Visualization of Cavity Filling Process in Fluid-assisted Injection Molding - Gas vs. Water, Polymer Testing, 26, 232-242 (2007) (SCI) --- NSC 94-2216-E182-005
- S.J. Liu, M.H. Hsieh, Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-Assisted Injection Molded Tubes, International Polymer Processing, 22, 82-89 (2007) (SCI) --- NSC 94-2216-E182-005
- S.J. Liu, M.J. Lin, Y.C. Wu, An Experimental Study of the Water-Assisted Injection Molding of Glass Fiber Filled Polybutylene Terephthalate (PBT) Composites, Composite Science and Technology, 67, 1415-1424 (2007) (SCI) --- NSC 94-2216-E182-005
- S.J. Liu, and C.H. Lin, An Experimental Study of Water-Assisted Injection Molding of Plastic Tubes with Dimensional Transitions, Journal of Reinforced Plastics and Composites, 26, 1441-1454 (2007) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, and K.H. Fu, Experimental Investigation and Numerical Simulation of the Heating/Cooling Process in Rotational Molding Enhanced with Fins, Journal of Applied Polymer Science, 108, 1696-1705 (2008) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, K.Y. Lin and S.K. Tsai, Improving Weldline Strengths of Injection Molded Parts by Ultrasonic Oscillation, Plastic, Rubber and Composites: Macromolecular Engineering, 37, 23-28 (2008) (SCI) --- NSC96-2628-E-182-001-MY3
- S.J. Liu and K.H. Fu, Effect of the Enhancing Fins on the Heating/Cooling Efficiency of Rotational Molding and the Molded Product Qualities, Polymer Testing, 27, 209-220 (2008) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, and C.C. Shih, Water Assisted Injection Molding of Glass Fiber Reinforced Nylon-6 Composites, Journal of Reinforced Plastics and Composites, 27, 985-999 (2008) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, K.Y. Lin, and M.K. Li, Rapid Fabrication of Microstructures onto Plastic Substrates by Infrared Hot Embossing, International Polymer Processing, 23, 323-330 (2008) (SCI) --- NSC96-2628-E-182-001-MY3
- S.J. Liu, K.Y. Lin, C.C. Liu, Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding Technology, Rubber Chemistry and Technology, 81, 156-167 (2008) (SCI) --- NSC96-2628-E-182-001-MY3
- S.J. Liu, P.C. Su, Novel Three-Dimensional In-Cavity Transient Temperature Measurements in Injection Molding and Fluid Assisted Injection Molding, Polymer Testing, 28, 66-74 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, Y.C. Kau, C.W. Liaw, Y.J. Peng, In-Vitro Elution of Vancomycin /Amikacin/Steroid from Solvent-free Biodegradable Scleral Plugs, International Journal of Pharmaceutics, 370, 75-80 (2009) (SCI)
- T.S. Fu, W.J. Ceh, L.H. Chen, S.S. Lin, S.J. Liu, S.W.N. Ueng, Enhancement of Posterolateral Lumbar Spine Fusion Using Low-Dose rhBMP-2 and Cultured Marrow Stromal Cells, Journal of Orthopaedic Research, 27, 380-384 (2009) (SCI)
- S.J. Liu, C.L. Hsueh, S.W.N. Ueng, S.S. Lin, J.K. Chen, Manufacture of Solvent-free Poly-lactic-glycolic Acid (PLGA) Scaffolds for Tissue Engineering, Asia Pacific Journal of Chemical Engineering, 4, 154-160 (2009) (SCI)
- S.J. Liu, P.C. Su, K.Y. Lin, In-situ Temperature Measurements in the Depths of Injection Molded Parts, Measurement, 42, 771-777 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
- K.Y. Lin, F.A. Chang, S.J. Liu*, Using Differential Mold Temperatures to Improve the Residual Wall Thickness Uniformity around Curved Sections of Fluid Assisted Injection Molded Tubes, International Communication in Heat and Mass Transfer, 36, 491-497 (2009) (SCI) -- NSC96-2628-E-182-001-MY3 (指導作者)
- S.J. Liu, P.C. Su, An Experimental Setup to Measure the Transient Temperature Profiles in Water Assisted Injection Molding, International Polymer Processing, 14, 234-241 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, Water Assited Injection Molding: A Review, International Polymer Processing, 14, 315-325 (2009) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, Y.C. Huang, Manufacture of dual-side surface-relief diffusers with various cross angles using ultrasonic embossing technique, Optics Express, 17, 18083-18092 (2009) (SCI)
- K.Y. Lin, S.J. Liu*, The Influence of Processing Parameters on Fingering Formation in Fluid Assisted Injection Molded Disks, Polymer Engineering and Science, 49, 2257-2263 (2009) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)
- Y.J. Peng, C.W. Wen, S.H. Chiou, S.J. Liu*, Sustained Release of Ganciclovir and Foscarnet from Biodegradable Scleral Plugs for the Treatment of Cytomegalovirus Retinitis, Biomaterials, 31, 1773-1779 (2010) (SCI) (指導作者)
- S.J. Liu, H.F. Cheng, The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites, Journal of Reinforced Plastics and Composites, 29, 497-509 (2010) (SCI) --- NSC95-2221-E-182-032-MY3
- S.J. Liu, Y.C. Huang, S.Y. Yang, K.H. Hsieh, Rapid Fabrication of Surface-relief Plastic Diffusers by Ultrasonic Embossing, Optics and Laser Technology, 42, 794-798 (2010) (SCI) --- NSC96-2221-E-182-032-MY3
- S.J. Liu, Y.C. Kau, C.Y. Chou, J.K. Chen, R.C. Wu, W.L. Yeh. Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing. Journal of Membrane Science, 355, 53-59 (2010) (SCI)
- K.Y. Lin, S.J. Liu*, Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends, Macromolecular Materials and Engineering, 295, 342-350 (2010) (SCI) --- NSC95-2221-E-182-032-MY3 (指導作者)
- Y.J. Peng, Y.C. Kau, C.W. Wen, K.S. Liu and S.J. Liu*, Solvent-Free Biodegradable Scleral Plugs Providing Sustained Release of Vancomycin, Amikacin and Dexamethasone – An In Vivo Study, Journal of Biomedical Materials Research Part A, 94A, 426–432 (2010) (SCI) (指導作者)
- S.J. Liu, K.M. Peng, Rotational Molding of Polycarbonate Reinforced Polyethylene Composites: Processing parameters and properties, Polymer Engineering and Science, 50, 1457-1465 (2010) (SCI)--- NSC95-2221-E-182-032-MY3
- S.J. Liu, F.J. Chiang, C.Y. Hsiao, Y.C. Kau, K.S. Liu. Fabrication of Balloon-expandable Self-lock Drug-eluting Polycaprolactone Stents Using Micro-injection Molding and Spray Coating Techniques. Annals of Biomedical Engineering, 38, 3185-3194 (2010) (SCI))
- K.S. Liu, Y.H. Liu, Y.J. Peng, S.J. Liu*, Experimental Absorbable Stent Permits Airway Remodeling, Journal of Thoracic and Cardiovascular Surgery, 141, 463-468 (2011) (SCI) (指導作者)
- S.J. Liu, C.Y. Hsiao, J.K. Chen, K.S. Liu, C.H. Lee, In-vitro Release of Anti-Proliferative Paclitaxel from Novel Balloon-expandable Polycaprolactone Stents, Materials Science and Engineering C: Materials for Biological Applications, 31, 1129-1135 (2011) (SCI)
- S.J. Liu, C.W. Ho, Experimental and Numerical Analysis of the Temperature Distribution of Injection Molded Products Using Protruding Microprobes, Reviews in Scientific Instruments, 82, 055109 (2011) (SCI)
- S.W.N. Ueng, L.J. Yuan, S.S. Lin, S.J. Liu, E.C. Chan, K.T. Chen, M.S. Lee, In vitro and in vivo analysis of a biodegradable poly(lactide-co-glycolide) copolymer capsule and collagen composite system for antibiotics and bone cells delivery. Journal of Trauma, Injury, Infection and Critical Care, 70, 1503-1509 (2011) (SCI)
- J.W. Huang, S.S. Lin, L.H. Chen, S.J. Liu, C.C. Niu, L.J. Yuan, C.C. Wu, W.J. Chen, The use of fluorescence labeled mesenchymal stem cells in poly(lactide-co-glycolide)/hydorxyapatite/collagen hybrid graft as a bone substitute for posterolateral spinal fusion, Journal of Trauma, Injury, Infection and Critical Care, 70, 1495-1502 (2011) (SCI)
- S.J. Liu, K.M. Peng, C.Y. Hsiao, K.S. Liu, H.T. Chung, J.K. Chan, Novel Biodegradable Polycaprolactone Occlusion Device Combining Nanofibrous PLGA/Collagen Membrane for Closure of Atrial Septal Defect (ASD), Annals of Biomedical Engineering, 39, 2759-2766 (2011) (SCI)
- S.J. Liu, L.Y. Chiou, J.Y. Liao, Ultra-low Dielectric Property of Electrospun Polylactide-polyglycolide Nanofibrous Membranes, Japanese Journal of Applied Physics, 50, 10PG05 (2011)
- F.Y. Lee, D.W. Chen, C.C. Hu, Y.T. Hsieh, S.J. Liu*, E.C. Chan, In-vitro and in-vivo investigation of drug-eluting implants for the treatment of periodontal disease, AAPS PharmSciTech, 12, 1110-1115 (2011) (SCI) (指導作者)
- S.J. Liu, W.R. Lin, K.Y. Lin, Morphological Development in Water Assisted Injection Molded Polyethylene/Polyamide-6 Blends, Polymers for Advanced Technology, 22, 2062-2068 (2011) (SCI) --- NSC95-2221-E-182-032-MY3
- D.W.C. Chen, J.Y. Liao, S.J. Liu*, E.C Chan, Novel biodegradable sandwich-structured nanofibrous drug-eluting membranes for repair of infected wounds: an in vitro and in vivo study, International Journal of Nanomedicine, 7, 763-771 (2012) (SCI) (指導作者)
- S.J. Liu, C.T. Liao, Fast fabrication of nanostructured anti-reflection layers for enhancement of solar cells performance using plasma sputtering and infrared assisted roller embossing techniques, Optics Express, 20, 5143-5150 (2012) (SCI) --- NSC100-2221-E-182-020-MY3
- C.Y. Hsiao, S.J. Liu*, S.W.N. Ueng, E.C. Chan, The influence of gamma irradiation and ethylene oxide treatment on the release characteristics of biodegradable poly(lactide-co-glycolide) composites, Polymer Degradation and Stability, 97, 715-720 (2012) (SCI) (指導作者)
- K.S. Liu, S.J. Liu*, H.Y. Chen, Y.K. Huang, Y.J. Peng, R.C. Wu, S.W.N. Ueng, Steady Antibiotic Release from Biodegradable Beads in the Pleural Cavity: An In Vitro and In Vivo Study, Chest, 141, 1197-1202 (2012) (SCI) (指導作者)
- D.W.C. Chen, Y.H. Hsu, J.Y. Liao, S.J. Liu*, J.K. Chen, S.W.N. Ueng, Sustainable Release of Vancomycin, Gentamicin and Lidocaine from Novel Electrospun Sandwich-structured PLGA/collagen Nanofibrous Membranes, International Journal of Pharmaceutics, 430, 335-341 (2012) (SCI) (指導作者)
- S.J. Liu, C.M. Hsu, P.W. Chang, Parameters Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts, International Polymer Processing, 27, 224-230 (2012) (SCI
- S.J. Liu, C.C. Huang, C.T. Liao, Continuous Infrared-assisted Double-sided Roll-to-roll Embossing of Flexible Polymer Substrates, Polymer Engineering and Science, 52, 1395-1401 (2012) (SCI) --- NSC100-2221-E-182-020-MY3
- C.H. Lee, C.J. Chen, S.J. Liu*, C.Y. Hsiao, J.K. Chen, The Development of Novel Biodegradable Bifurcation Stents for the Sustainable Release of Anti-Proliferative Sirolimus, Annals of Biomedical Engineering, 40, 1961-1970 (2012) (SCI) (指導作者)
- Y.C. Kau, D.W.C. Chen, Y.T. Hsieh, F.Y. Lee, S.J. Liu*, Compression Molding of Biodegradable Drug-eluting Implants for Sustained Release of Metronidazole and Doxycycline, Journal of Applied Polymer Science, 127, 554-560 (2013) (SCI) (指導作者)
- S.J. Liu, W.A. Chen, Nanofeatured anti-reflective films manufactured using hot roller imprinting and self-assembly nanosphere lithography, Optics and Laser Technology, 48, 226-234 (2013) (SCI) NSC100-2221-E-182-020-MY3
- D.W.C. Chen, F.Y. Lee, J.Y. Liao, S.J. Liu*, C.Y. Hsiao, J.K. Chen, Preclinical experiments on the release behavior of biodegradable nanofibrous multi-pharmaceutical membranes in the four-wall intrabony defect, Antimicrobial Agents and Chemotherapy, 57, 9-14 (2013) (SCI) (指導作者)
- Y.J. Peng, Y.T. Lu, K.S. Liu, S.J. Liu*, L. Fan, W.C. Huang, Biodegradable Balloon-expandable Self-locking Polycaprolactone Stents as Buckling Explants for the Treatment of Retinal Detachment: An in vitro and in vivo study, Journal of Biomedical Materials Research Part A, 101A, 167-175 (2013) (SCI) (指導作者)
- K.Y. Lin, S.J. Liu*, Fast Fabrication of Microfeatured Plastic Diffusers Using IR-assisted Injection Molding, Materials and Manufacturing Process, 28, 19-23 (2013) (SCI) (指導作者) --- NSC100-2221-E-182-020-MY3
- D. Lee, W.A. Chen, T.W. Huang, S.J. Liu*, Factors influencing the warpage in in-mold decoration (IMD) injection molded parts, International Polymer Processing, 28, 221-227 (2013) (SCI) (指導作者) NSC98-2221-E-182-003-MY3
- Y.K. Chao, K.S. Liu, Y.C. Wang, Y.L. Huang, S.J. Liu*, Biodegradable cisplatin-eluting Tracheal Stent for malignant airway obstruction: In vivo and in vitro studies, Chest, 144, 193-199 (2013) (SCI) (指導作者)
- Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Sustainable Release of Carmustine from Biodegradable Poly[(d,l)-lactide-co-glycolide] Nanofibrous Membranes in the Cerebral Cavity: In vitro and in vivo studies, Expert Opinion on Drug Delivery, 10, 879-888 (2013) (SCI) (指導作者)
- C.H. Lee, C.L. Chiang, S.J. Liu*, Electrospun nanofibrous rhodanine/polymethylmethacrylate membranes for the removal of heavy metal ions, Separation and Purification Process, 118, 737-743 (2013) (SCI) (指導作者)
- Y.Y Tseng, Y.C. Kao, J.Y. Liao, W.A. Chen, S.J. Liu*, Biodegradable drug-eluting poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of vancomycin to the brain tissue: In vitro and in vivo studies, ACS Chemical Neuroscience, 4, 1314-1321 (2013) (SCI) (指導作者)
- Y.Y Tseng, J.Y. Liao, W.A. Chen, Y.C. Kao, S.J. Liu*, Biodegradable poly[(d,l)-lactide-co-glycolide] nanofibers for the sustainable delivery of lidocaine into the epidural space after laminectomy, Nanomedicines, 9, 77-87 (2014) (SCI) (指導作者)
- C.H. Lee, Y.H. Lin, S.H. Chang, C.D. Tai, S.J. Liu*, Y. Chu, C.J. Wang, M.Y. Hsu, H.Chang, G.J. Chang, K.C. Hung, M.J. Hsieh, F.C. Lin, I.C. Hsien, M.S. Wen, Y. Huang, Local Sustained Delivery of Acetylsalicylic Acid via Hybrid Stent/Biodegradable Nanofibers Reduces Adhesion of Blood Cells and Promotes Re-Endothelialization to the Denuded Artery, International Journal of Nanomedicine, 9, 311-326 (2014) (SCI) (指導作者)
- J.J. Wu, H.W. Lee, J.H. You, Y.C. Kau, S.J. Liu*, Adsorption of silver ions on polypyrrole embedded electrospun nanofibrous polyethersulfone membranes, Journal of Colloid and Interface Science, 420, 145-151 (2014) (SCI) (指導作者)
- C.H. Lee, S.H. Chang, Y.H. Lin, S.J. Liu*, C.J. Wang, M.Y. Hsu, K.C. Hung, Y.H. Yeh, W.J. Chen, I.C. Hsieh, M.S. Wen, Acceleration of re-endothelialization and inhibition of neointimal formation using hybrid biodegradable nanofibrous rosuvastatin-loaded stents, Biomaterials, 35, 4417-4427 (2014) (SCI) (指導作者)
- C.H. Lee, M.J. Hsieh, S.H. Chang, Y.H. Lin, S.J. Liu*, T.Y. Lin, K.C. Hung, J.H.S. Pang, J.H. Juang, Enhancement of Diabetic Wound Repair Using Biodegradable Nanofibrous Metformin-Eluting Membranes: in Vitro and in Vivo, ACS Applied Materials and Interfaces, 6, 3979-3986 (2014) (SCI) (指導作者)
- C.H. Lee, K.S. Liu, G.H. Jhong, S.J. Liu*, M.Y. Hsu, C.J. Wang, K.C. Hung, Finite Element Analysis of Helical Flows in Human Aortic Arch: A Novel Index, Biomicrofluidics, 8, 024111 (1-13) (2014) (SCI) (指導作者)
- C.H. Lee, G.H. Jhong, M.Y. Hsu, S.J. Liu*, C.J. Wang, K.C. Hung, Effect of force-induced mechanical stress at the coronary artery bifurcation stenting: Relation to in-stent restenosis, Journal of Applied Physics, 115, 204904 (1-9) (2014) (SCI) (指導作者)
- C.H. Lee, C.Y. Yu, S.H. Chang, K.C. Hung, S.J. Liu*, C.J. Wang, M.Y. Hsu, I.C. Hsieh, W.J. Chen, Y.S. Ko, M.S. Wen, Promoting Endothelial Recovery and Reducing Neointimal Hyperplasia Using Sequential-like Release of Acetylsalicylic Acid and Paclitaxel-loaded Biodegradable Stents, International Journal of Nanomedicine, 9, 4117-4133 (2014) (SCI) (指導作者)
- Y.H. Hsu, D.W.C. Chen, C.D. Tai, S.J. Liu*, E.C. Chan, Biodegradable drug-eluting nanofibers enveloped implants providing sustained release of high bactericidal concentrations of vancomycin and ceftazidime: In vitro and in vivo study, International Journal of Nanomedicine, 9, 4347-4355 (2014) (SCI) (指導作者)
- Y.C. Kau, C.C. Liao, Y.C. Chen, S.J. Liu*, Sustained Release of Lidocaine from Solvent-free Biodegradable Poly[(d,l)-lactide-co-glycolide] (PLGA): In vitro and in vivo study, Materials, 7, 6660-6676 (2014) (SCI) (指導作者)
- C.H. Lee, S.H. Chang, K.C. Hung, Y.H. Lin, S.J. Liu*, T.Y. Lin, M.J. Hsieh, J.H.S. Pang, J.H. Juang, Augmentation of Diabetic Wound Healing and Enhancement of Collagen Content using Nanofibrous Glucophage-loaded Collagen/PLGA Scaffold Membranes, Journal of Colloid and Interface Science, 439, 88-97 (2015) (SCI) (指導作者)
- D. Lee, D.W.C. Chen, S.F. Chiu, S.J. Liu*, Electrospun nanofibrous polylactide/chitosan mats for the filtration of silver ions, Textile Research Journal, 85, 346-355 (2015)(SCI) (指導作者))
- Y.C. Chou, Y.S. Cheng, Y.H. Hsu, Y.H. Yu, S.J. Liu*, Biodegradable Nanofiber-Membrane for Sustainable Release of Lidocaine at the Femoral Fracture Site as a Periosteal Block: In Vitro and In Vivo Studies in a Rabbit Model, Colloids and Surfaces B: Biointerfaces, 140, 332-341 (2016) (SCI) (指導作者))
- C.H. Lee, Y.K. Chao, S.H. Chang, W.J. Chen, K.C. Hung, S.J. Liu*, J.H. Juang, Y.T. Chen, F.S. Wang,Nanofibrous rhPDGF-eluting PLGA-collagen hybrid Scaffolds Enhance Healing of Diabetic Wounds, RSC Advances, 6, 6276-6284 (2016) (SCI) (指導作者))
|