最高學歷：德國阿亨工業大學　 材料工程博士
研究領域：熱處理、腐蝕及防蝕工程、 穿透式電子顯微鏡應用
聯絡方式：電話:(03)211-8800　分機　5655
　　　　　e-mail: gfehu@mail.cgu.edu.tw
實 驗 室：材料與腐蝕工程實驗室  分機 5655

簡歷： 

        ●學歷:

        學士：臺灣工業技術學院 機械工程技術
        碩士：交通大學機械工程
        博士：德國 RWTH Aachen材料工程

    ●經歷:

        明志工專機械工程科講師
        德國GKSS客座研究員
        德國RWTH Aachen電子顯微鏡共同實驗室研究員

研究領域：

熱處理、腐蝕及防蝕工程、 穿透式電子顯微鏡應用

1. C. A. Huang, F.-Y. Hsu, C. H. Yu, “Electropolishing behavior of pure titanium in sulfuric acid-ethanol electrolytes with an addition of water” Corrosion Science 53(2) (2011) pp. 589-596.
2. C. A. Huang, C. K. Lin, Y.H. Yeh, “The corrosion and wear resistances of magnesium alloy (LZ91) electroplated with copper and followed by 1 μm-thick chromium deposits” Thin Solid Films 519 (15) (2011) pp. 4774-4780.
3. C.A. Huang, Y.W. Liu, C. Yu, C.–C. Yang, “Role of carbon in the chromium deposit electroplated from a trivalent chromium-based bath” Surface and Coatings Technology 205(11)( 2011) pp. 3461-3466.
4. C.A. Huang, J.H. Chang, Y.H. Lin, “Sharpening behaviour of W-wire electrodes in 10-25 wt.% NaOH solutions” Corrosion Science 53 (8) (2011) pp. 2566-2574.
5. C.A, Huang, C.K. Lin, W.-A. Chiou, F.-Y. Hsu, “Microstructure study of the hardening mechanism of Cr-Ni alloy deposits after flame heating for a few seconds” Surface and Coatings Technology 26 (2-3) ( 2011) pp. 325-329.
6. C. A. Huang, C. Y. Chen, “Hardness variation and annealing behavior of a Cr–Ni multilayer electroplated in a trivalent chromium-based bath”, Surface & Coatings Technology 203 (2009) 3320–3324.
7. C. A. Huang, U. W. Lieu, C. H. Chuang, “Role of nickel undercoat and reduction-flame heating on the mechanical properties of Cr–C deposit electroplated from a trivalent chromium based bath”, Surface & Coatings Technology 203 (2009) 2921–2926.
8. C. A. Huang, U. W. Lieu, C. H. Chuang, “The hardening mechanism of a chromium–carbon deposit electroplated from a trivalent chromium-based bath”, Thin Solid Films 517 (2009) 4902–4904.
9. C. A. Huang, C. K. Lin, C. Y. Chen, “Hardness variation and corrosion behavior of as-plated and annealed Cr–Ni alloy deposits electroplated in a trivalent chromium-based bath”, Surface & Coatings Technology 203 (2009) 3686–3691.
10. C. A. Huang, Y. C. Chen, “The effect of water content on the electropolishing behavior of Inconel 718 alloy in perchloric–acetic acid mixtures”, Corrosion Science 51 (2009) 1901–1906.
11. S.C. Chen, G.C. Tu, Caryat C.Y. Hung, C.A. Huang and M.H. Rei,“Preparation of palladium membrane by electroplating on AISI 316L porous stainless steel supports and its use for methanol steam reformer, J. Membrane Science 314 (2008) pp. 5-14.
12. C.A. Huang, Y.C. Chen and J.H. Chang,”The electrochemical polishing behavior of the Inconel 718 alloy in perchloric-acetic mixed acids” Corrosion Science 50 (2008) pp. 480-489.
13. Chun-Chen Yang, Ying-Jeng Lee, Shwu-Jer Chiu, Kuo-Tong Lee, Wen-Chen Chien, Che-Tseng Lin, Ching-An Huang, “Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC)”, J Appl. Electrochem. 38 (2008) pp. 1329-1337.
14. C.A. Huang, T.H. Wang, T. Weirich and V. Neubert, “A pretreatment with galvanostatic etching for copper electrodeposition on pure magnesium and magnesium alloys in an alkaline copper-sulfate bath”, Electrochimica Acta 53 (2008) pp. 7235-7241.
15. C. A. Huang, T. H. Wang, Y. Z. Chang, W. C. Han, C. H. Lee, “Tensile behavior of different pretreated alloy 718 sheets welded with electron beam welding (EBW)”, Science and Technology of welding and Joining 13 (2008) pp. 646-655.

Highly  Cited 著作(Max:5篇 Based on Google Scholar 2014/05)：